Skip to content

Generic 12864 Panel

1. Product Introduction


This is a opensouce, cheap, with RGB indicator, common to marlin's display, supports offline printing, resolution is 12864, display area is 3.2'', SD card holder can be side or vertical, Dimensional compatible with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, Software compatible with MINIPANEL in marlin firmware.

Available in a single backlight color version, also available in RGB backlight (NEOPIXEL_LED)version.Choose according to your preferences!

2. Features

  • 3.2" inch high contrast Graphic LCD,Dimensional compatible with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  • Black-gray/black-green/white-black/white-blue/green-black, 5 display styles
  • SPI communication to host micro-controller
  • Support Vertical or side SD slot with card detect,with a optional SD module
  • Software configurable contrast setting
  • 3D printable case and mount STL file
  • Configurable RGB backlight, WS2811 single line control.
  • Black background or transparent backgroun.
  • The extra EXP3 is 1284P or a motherboard that requires a single display function.

3. Application

3D printer,CNC machines ,Other micro controller projects

4. Typical Wiring

5. Firmware config

The back light control pin is at EXP1_04.

5.1 Marlin

Only need to enable the following define

#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.

5.2 Klipper


6. Optional Hardware module:

The SD card of mini12864 can be set on the side or in the front, which requires a module to implement. As shown below:


7. Attention


8. FAQ


9. Attachments

9.1 Schematic

You can find the schematics for the three versions on github.

9.2 Dimensions

For detailed dimensions please check dwg/step file on github.


Tech Support

Please submit any technical issue into our forum or facebook.